Glastender GT-24-CW-240 Glasswasher
As low as $154.81
The Glastender GT-24-CW-240 Glasswasher is a clockwise rotating 120/208v/60/1-ph powered unit. If your establishment needs to process up to 1,000 2-½” diameter (10” max height) glasses per hour this model should be on your shortlist. The large volume of glassware this unit can handle is efficiently housed in a unit only 24-⅛” wide, 24-⅛” deep, and 38-½” tall. With the continuous conveyor, a single person can drop off a load of glassware and come back in 3 minutes with freshly washed glasses that are ready to store. Additionally, a single person can continuously load and unload the unit while bussers deliver glasses to be washed, perfect for keeping up with most establishments’ peak hours.
Description
The Glastender GT-24-CW-240 Glasswasher is a clockwise rotating 120/208v/60/1-ph powered unit. If your establishment needs to process up to 1,000 2-½” diameter (10” max height) glasses per hour this model should be on your shortlist. The large volume of glassware this unit can handle is efficiently housed in a unit only 24-⅛” wide, 24-⅛” deep, and 38-½” tall. With the continuous conveyor, a single person can drop off a load of glassware and come back in 3 minutes with freshly washed glasses that are ready to store. Additionally, a single person can continuously load and unload the unit while bussers deliver glasses to be washed, perfect for keeping up with most establishments’ peak hours.
Inside the glasswasher are 2 tanks and sprayers for hot water washing and cool water rinsing. The two zones are separated by a curtain that prevents water from mixing. The front of the unit also has 2 curtains to prevent water from spraying out. Each zone has a dedicated ⅙ HP recirculating pump that delivers high-pressure water through jets to thoroughly wash as well as rinse glassware. Water for the washing zone is heated with a 4,000-watt heater with an Incoloy sheath.
The control panel has temperature displays for the wash and rinse water, this is important to maintain the proper temperatures to meet sanitary requirements. The control panel includes a power indicator light, conveyor on/off switch, fill switch, check chemicals light, and switches for priming the sanitizer and detergent lines. You can choose the location of the control panel and it can be shipped on the front or left side depending on what’s best for your application. Water levels inside the tanks are electronically monitored and automatically fill as necessary. Sanitizer and detergent are precisely added to the water with peristaltic pumps. This unit uses a maximum of ¼ of a gallon of water per minute when operating.
Removable side panels, conveyor, top, spray boxes, and front shields make servicing and cleaning the unit simple. The Glastender GT-24-CW-208 Glasswasher has rugged and easy to clean stainless steel legs, floor, tanks, and conveyor.
The unit should be plumbed with ½” water supplies for both hot and cold water that adapt to ⅜” FMPT fittings. For proper operation, the water supplies’ pressures must be in the range of 25 PSI to 100 PSI. Hot water supplied to the device needs to be between 130ºF and 150ºF. The cold water supply needs to be greater than 75ºF to meet FDA requirements. An open floor drain should be used for drainage from the 1-½” tailpiece.
This unit uses 120/208v/60/1-ph power and requires a dedicated 30.0 amp circuit.
The Glastender GT-24-CW-208 Glasswasher was tested and certified by ETL and ETL-Sanitation.
Standard Features:
- Conveyor lifts out for easy cleaning
- Set of three separate curtains is included
- Switch panel may be relocated in the field
- Thermostat controls wash tank temperature
- Automatic electronic peristaltic metering pumps
- Removable side panels for easy service access
- Digital temperature gauges built into switch panel
- Available with clockwise or counterclockwise rotation
- 1/6 HP pumps recirculate wash water and rinse water
- Removable top and front shield for easy cleaning access
- Prime switches provided for high speed chemical priming
- Sensor activated low water cutoff in wash tank protects heater
- 4000 watt heater encased in an incoloy sheath to resist caustic detergents
- Spray boxes unlatch for easy cleaning – engineered for maximum soil removal
- Automatic chemical sensor alerts operator when detergent and sanitizer is low
- Fractional HP drive motor powers the belt driven conveyor and includes built-in slip clutch
- Reviews (0)
Be the first to review “Glastender GT-24-CW-240 Glasswasher”
Lease for
$154.81 /Month
CALL for
Professional support:
1-888-280-3117
Get Complete Program Package
Specifications
Brand | Glastender |
---|---|
Certifications | ETL |
Width (in) | 24.13 |
Height (in) | 38.5 |
Depth (in) | 24.13 |
Weight | 180.00 |
Reviews
There are no reviews yet.